Tip for mounting of wall plates
Place wall plate on the wall just where you want it and mark with a pen
where the holes will be. Initially drill the top hole and fasten the
plate without tightening the screw. Because the top hole of the back
plate is horizontal, you can adjust the plate a bit from side to side
before you drill the other holes and tighten the plate permanently.
This is especially practical when mounting objects on tile to avoid
making unnecessary holes. Also, this procedure helps when mounting two
plates placed a specific distance apart from each other such as a towel
rail.
The mounting instructions provided are meant only as an
illustration and guide. All walls and surfaces are slightly different
and may require a different type of mounting system than described
below.
If you have any questions or if you have any doubts as to the
proper mounting procedure, we highly recommend you contact a
professional for installation assistance.
Concrete
Use expansion screws or nylon toggles for heavier objects meant to take
more weight. In some concrete walls, you may need to drill with a
hammer-drill.
Choose a drill bit with the same dimensions as the anchor.
|